LiPo/Li-ion/LiHV/LiFe/NiMH 50W Compact Smart Balance Charger JTN-CHR-LN550

Features
• The digital screen displays the percentage of each single cell, which can be seen the present condition.
• It support to the Li-Po, Li-Fe and Li-Hv Ni-MH/Ni-Cd batteries.
• The maximum current is 4A, and it can be charged quickly for the less cells.

Specifications:
•  Input: AC 100V-240V 50/60Hz
• Output power : max 50W
• Charge current range : 0.5A/1A/1.5A/2A/2.5A/3A/3.5A/4A
• LiPo/LiFe/LiHV battery cell counts: 2-4s
• NiMH/NiCD battery cell counts : 4-8s

Charging Process
1. Connect the charger to AC power.
2. The charger working normally when the LED in the middle turns into flashing Green.
3. Please choose the right battery’s type (Li-Po/Li-Fe/Li-Hv/Ni-MH/Ni-Cd) with Key (long press).
4. Short press the right key to select the max charging current (0.5A/1A/1.5A/2A/2.5A/3A/3.5A/4A).
5. Please connect to the main connector in front of the charger, if the battery is LiPo/LiFe/LiHV, then also should be connect the corresponding balancing port.
6. Charging begins at this time with the red LED in the middle keep lighting. The digital screen displays the power percentage of each single battery when the battery is Li-Po, Li-Fe, Li-Hv, and it will displays the total voltage of the battery pack when the battery is Ni-MH or Ni-Cd.
7. The LED in the middle turns to orange and keep lighting when charging is full and enter into the CV Model.The LED in the middle turns to green and keep lighting when fully charge.
8. The LED in the middle turns into flashing Green after plug out the battery. Then the next battery can be charged.

Status Display:
• Stand By: Green Flash
• Charging in CC mode: Constant Red
• Charging in CV mode: Constant Orange
• Full Charged: Constant Green