Product Parameters
- Category:Chargers & More
- Tags:4.8V NiMH battery charger, 6.0V NiMH battery charger, 7.2V NiMH battery charger, 8.4V NiMH battery charger, 9.6V battery charger, NiCD battery charger, NiMH battery charger
- Item #:JTN-CHR-NI48
- Product Type:Charger
- Input:100-240V 50/60Hz
- Output:Maximum 20Watts
- Charge Fits:4-8 cells NiMH/NiCD
- Dimensions:90*66*32mm
- Approx. Weight:105.0±10g
Specifications:
• AC input: 100-240V 50/60Hz
• Charge current: 2Amps
• Maximum output: 20Watts
• Charges NiMH or NiCd battery: 4-8cells
• Voltage peak detection
Status Display:
• Power LED:
“LED not light”=Charger is not plugged into a power supply
“LED is green”=Charger is plugged into a power supply
• Status LED:
“LED is green”=1. Charger is ready 2. Battery is fully charged
“LED is red”= Battery is charging
Charging Instructions:
1. Plug the charger into an AC power supply(100-240V).
2. Once connected to a power supply, both power LED and status LED will turn green.
3. Plug in a 4-8 cell NiMH or NiCd battery pack, that has been unplugged and removed from the RC vehicle.
4. Press the start button to begin the charging process. The status LED will turn red, this means the battery is
charging. If the battery pack gets hot, press the stop button, unplug the battery, and let cool. Stop may be pushed
at any time to stop the charging process. Once cool, plug the battery into the charger and repeat steps 3 and 4.
5. The status LED will turn green when the battery pack is fully charged.
6. Unplug the battery pack from the charger.
7. Unplug the charger from the power supply.
4.8V-9.6V(4-8 cells) NiMH/NiCd Battery Charger
